BTNDH - 304017 BRULIN MP 1793

  • MSDS: BTNDH
  • Manufacturer: BRULIN AND CO INC
  • Product Name: 304017 BRULIN MP 1793
  • National Stock Number: 6850-00F034197
Product Identification

Product ID:304017 BRULIN MP 1793
MSDS Date:05/03/1993
FSC:6850
NIIN:00F034197
MSDS Number: BTNDH

Responsible Party
BRULIN AND CO INC
2920 DR ANDREW J BROWN AVE
INDIANAPOLIS, IN 46206-0270
US

Emergency Phone: 317-923-3211/317-923-3233

Info Phone: 317-923-3211/800-428-7149

Cage: 94058

Contractor
BRULIN AND CO INC
270 INDIANAPOLIS, IN 46205-0270 US

Telephone: 317-923-3211

Cage: 94058

Ingredients

KEROSENE (PETROLEUM), HYDROTREATED; PETROLEUM DISTILLATE,

CAS: 64742-47-8

RTECS: OA5504000

Fraction By Weight: 10-30%


ISOPARAFFINIC HYDROCARBONS (NAPHTHA PETROLEUM),

CAS: 64742-48-9

Fraction By Weight: 70-90%

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:DIRECT EYE CONTACT MAY CAUSE
IRRITATION. REPEATED SKIN COTACT MAY CAUSE IRRITATION. HIGH VAPOR
CONCENTRATIONS ARE IRRITATING TO EYES & RESPIRATORY TRACT & MAY
PRODUCE CNS EFFECTS. MINUTE AMOUNTS ASPIR ATED INTO THE LUNGS
DURING INGESTION MAY CAUSE MILD TO SEVERE PULMONARY INJURY &
POSSIBLE DEATH. CHRONIC SKIN SEE SUPP
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, REDNESS, HEADACHE, DIZZINESS,
NUMBNESS & DEFATTING.

First Aid

First Aid:EYES: FLUSH W/LARGE AMOUNTS OF WATER FOR 15 MINS. INHALATION:
REMOVE TO FRESH AIR. ADMINISTER OXYGEN IF BREATHING IS DIFFICULT.
SKIN: WASH W/MILD SOAP & WATER. INGESTION: DON'T INDUCE VOMITING.
KEEP W ARM/QUIET. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Fire Fighting

Flash Point Method:TCC
Flash Point:142F
Lower Limits:1.3
Upper Limits:8.6
Extinguishing Media:FOAM/CO2/DRY CHEMICAL
Fire Fighting Procedures:USE SCBA. WATER FOG MAY BE USED TO COOL CLOSED
CONTAINERS. AVOID SPREADING BURNING LIQUID W/WATER USED FOR COOLING
PURPOSES.
Unusual Fire/Explosion Hazard:NEVER USE WELDING/CUTTING TORCH ON/NEAR
DRUM, EVEN EMPTY.

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. VENTILATE THE
AREA WELL. ABSORB ON SOLID ABSORBENT & SHOVEL INTO CONTAINERS.

Handling

Handling and Storage Precautions:STORE AT TEMP. >0F & <120F. NEVER USE
WELDING/CUTTING TORCH ON/NEAR DRUM, EVEN EMPTY.
Other Precautions:AVOID INHALATION OF VAPORS.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:MECHANICAL (GENERAL)
Protective Gloves:RECOMMENDED
Eye Protection:RECOMMENDED
Other Protective Equipment:EYE BATHS & SAFETY SHOWERS.
Work Hygienic Practices:WASH HANDS AFTER HANDLING. REMOVE/LAUNDER
CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
HAZARDS CONT'D: EXPOSURE MAY CAUSE DERMATITIS.

Chemical Properties

Boiling Pt:B.P. Text:360-405F
Melt/Freeze Pt:M.P/F.P Text:<0F
Vapor Pres: 1
Vapor Density: 5.8
Spec Gravity:0.76
Evaporation Rate & Reference:(N BU AC =1): 0.05
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR LIQUID,VERY MILD ODOR

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS/ACIDS/BASES.
Hazardous Decomposition Products:CO, CO2

Disposal

Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.